OK, so here are just a few photos of what I have so far, first one should be the power details from the side of my main a/c unit,
next I have a few photos of said lipo packs, still need to find a way to charge and test properly.
only thing on any of the individual cells to indicate details, and only on 1 of them
Now the wires as u see them are as follows, large blue plug, power out, small wires in small white plug, charge wires, the guy who has them, got a little curious so he tested them out a little, first off tried to charge via the large blue plug, result, instant balloon, lol, so he modified another set if cords to charge through the small wires, second pack started at 9.3v and he charged it to 12.1v, still have no way to test the capacity of the packs yet. So he plugged it into an led overhead work light, and ran it for 14 hrs straight, and it didn't even look like being flat, however he didn't test the voltage after the 14 hrs to see how much it had drained it.
Oh, another question too, when doing ur initial multi meter tests on 18650's, what voltage is the minimum u guys usually have as a bottom end figure of cells that will be fine to charge and test further. Reason I ask, is I picked up a bag full of laptop batteries on Fri and busted em.open. and 1 of the cells was at like 0.9v. And a cpl @ 1.2-1.6v. I think I got a cpl of 17600's as well, as they're same length, just not as, fat, and no type numbers on em so I'm guessing.